This product is composed of the following items:
1x Solar collector SC-30:
– manifold (heat exchange unit)
– aluminium frame universal
– set of screws for support
– vacuum pipes "heat-pipe" with a length of 1.8 m, 30 pieces with a maximum capacity of 0.5065388 kWh * per day per year
– plastic fixers (fixing the low part of vacuum tubes)
– antidust seal rings
– conductive thermal paste "MG Chemicals"
– 2x connecting adapter pipe 22mm-thread 1/2″ "daddy"
1x Hydraulic station:
– circulating pump WILO
– expansion tank Varem 24l
– manometer
– safety valve "AKE" 6 bar
– inlet/outlet taps
1x Digital controller SR81:
– the programmer
– display
– 3x temperature sensors
1x Solar collector SC-30:
– manifold (heat exchange unit)
– aluminium frame universal
– set of screws for support
– vacuum pipes "heat-pipe" with a length of 1.8 m, 30 pieces with a maximum capacity of 0.5065388 kWh * per day per year
– plastic fixers (fixing the low part of vacuum tubes)
– antidust seal rings
– conductive thermal paste "MG Chemicals"
– 2x connecting adapter pipe 22mm-thread 1/2″ "daddy"
1x Hydraulic station:
– circulating pump WILO
– expansion tank Varem 24l
– manometer
– safety valve "AKE" 6 bar
– inlet/outlet taps
1x Digital controller SR81:
– the programmer
– display
– 3x temperature sensors
All systems for heating water in the pools are assembled on the basis of the PG solar collector with hit pipes of 24 pieces each, a heat exchanger (or its analogue), a pump station and a programmer for operating modes of the SR81 system. The heat exchanger consists of stainless steel plates, which guarantees 100% protection of the pool heating system from corrosion. Installation of the system does not require the invitation of a professional specialist and can be done independently. All the difficulty consists only in installing the heat exchanger in the circuit of the pool filtration system. The maximum effect of using the PG Pool system will be achieved if the pool is covered with a blanket overnight, especially in the coldest months. For areas with low insolation, we recommend increasing the number of solar collectors by one. The service life of the pool heating system is at least 30 years. The payback of the system, if we take alternative heat sources as a basis, such as gas stoves or heat pumps, will not exceed 3 years.
SHC Fast Assembly CPC Heat Pipe Collector
– Sunlight concentrators make the efficiency doubly increased.
– Fast assembly CPC concentrators more easily installation and transportation.
– 360 degree sunlight absorber, hot water in cloudy.
– Overheating protection just disassembly the CPC concentrators in summer.
– Temperature startup more faster than the normal solar thermal collectors.
– Applicable for the industry heating.
– More thermal production based on the same aperture area.
– EN12975/Solar Keymark.
CPC Reflector
Maximum performance at minimum dimensions. Absorber is bigger than gross surface area. Three dimensionally 360 degree shaped absorbers for the greatest possible energy collecting surface, utilized up to most of the diffuse and direct radiation from morning to evening.
– Sunlight concentrators make the efficiency doubly increased.
– Fast assembly CPC concentrators more easily installation and transportation.
– 360 degree sunlight absorber, hot water in cloudy.
– Overheating protection just disassembly the CPC concentrators in summer.
– Temperature startup more faster than the normal solar thermal collectors.
– Applicable for the industry heating.
– More thermal production based on the same aperture area.
– EN12975/Solar Keymark.
CPC Reflector
Maximum performance at minimum dimensions. Absorber is bigger than gross surface area. Three dimensionally 360 degree shaped absorbers for the greatest possible energy collecting surface, utilized up to most of the diffuse and direct radiation from morning to evening.
